Operation mode-ON-OFF Current rating-10 Amps Operating voltage-240 Volts Contact type-Normally Open Specification: Voltage:AC 240V 50/60Hz Voltage:AC 240V 50/60Hz Size: 120 x 70 x 36mm Size: 120 x 70 x 36mm Colour: White Colour: White Type: 2 Way Type: 2 Way Gang options : 4 Gang (Note: Only the 1, 2 and 3 switch buttons of the 4 gang switch support 2 way light control.) Gang options : 4 Gang (Note: Only the 1, 2 and 3 switch buttons of the 4 gang switch support 2 way light control.) Load Power:300W per gang Load Power:300W per gang on, off switch: ON (Red) and OFF (Blue, can be turned off) on, off switch: ON (Red) and OFF (Blue, can be turned off) Panel Material:Tempered Crystal Glass Panel Panel Material:Tempered Crystal Glass Panel Neutral Wire Connection required Neutral Wire Connection required Package includes: 1 x Smart ZigBee 3.0 Four Gang 2 Way Switch 1 x Smart ZigBee 3.0 Four Gang 2 Way Switch 1 x User Manual 1 x User Manual Some Mounting Screws Some Mounting Screws Common Questions: 1. Does it need a ZigBee Bridge / Hub? A: Yes, as a zigbee device, it needs a zigbee hub like Hue Bridge, Echo Plus, ST Hub, Hubitat Hub. 1. Does it need a ZigBee Bridge / Hub? A: Yes, as a zigbee device, it needs a zigbee hub like Hue Bridge, Echo Plus, ST Hub, Hubitat Hub. 2. Does the 2 way light control still works if there is no wifi or a zigbee hub? A: Yes, the 2 way light control still manually works fine without wifi or a zigbee hub. 2. Does the 2 way light control still works if there is no wifi or a zigbee hub? A: Yes, the 2 way light control still manually works fine without wifi or a zigbee hub. 3. Any special wirings are required for this 2 way switch? A: You just need to wire the lights directly to one 2 way switch, another 2 way switch just need to power supply, but please note that both sides need the 2 way switches 3. Any special wirings are required for this 2 way switch? A: You just need to wire the lights directly to one 2 way switch, another 2 way switch just need to power supply, but please note that both sides need the 2 way switches 4. Do they support 3 way light control? A: Yes, you just need 3 pcs of the smart 2 way switches 4. Do they support 3 way light control? A: Yes, you just need 3 pcs of the smart 2 way switches 5. Do they need a device handler for ST and Hubitat hub? A: Yes for ST hub, but do need for Hubitat. 5. Do they need a device handler for ST and Hubitat hub? A: Yes for ST hub, but do need for Hubitat. 6. How many devices will be added in the zigbee hub or APP? A: 3 devices for 3 Gang 2 way switch. 6. How many devices will be added in the zigbee hub or APP? A: 3 devices for 3 Gang 2 way switch. 7. Is your 1 gang 2 way switch set compatible with the 2 , 3, 4 gang 2 way switch? A: The one gang 2 way switch set is pre-set in factory and can not be paired with the 2, 3, 4 gang 2 way switch. The compatible one gang 2 way switch will be available soon 7. Is your 1 gang 2 way switch set compatible with the 2 , 3, 4 gang 2 way switch? A: The one gang 2 way switch set is pre-set in factory and can not be paired with the 2, 3, 4 gang 2 way switch. The compatible one gang 2 way switch will be available soon ★ Instant wireless 2 way light control: A switch button can be directly paired and work with another 2 way switch wirelessly without a ZigBee Hub or Internet ★ Not any delay between these 2 way switches: Not like those 2 way light control through APP automation setting that comes with significantly delay. ★ Support 1 way, 2 way (2 pcs smart 2 way switches), 3 way (3 pcs smart 2 way switches) light control, the light just need to connect with one of the switches. Note: Only the 1, 2 and 3 switch buttons of the 4 gang switch support 2 way light control. ★Smart ZigBee 3.0 Switch: Compatible with Philips Hue Bridge, ST Hub, Hubitat Hub, Nue ZigBee Bridge ★It can be used as a normal ZigBee 4 gang light switch or 2 way switch.
